Faggiolati Aeration: Arial Jet
These aerators are frequently used in wastewater treatment plants, especially during homogenisation and equalisation, pre-airing stages, biological oxidation, oxidation-nitrification, sludge stabilisation and post-airing stages. AJ radial submerged aerators can be utilised for the flotation of greases, oils and solids, at the relevant stages of flotation. This clearly means that they can be utilised during neutralization […]
Faggiolati Aeration: OSSI-Jet
Applications The different type of impellers and ejectors offered by the Ossi-jet system optimise the following processes: Oxidation CO2 neutralisation Ozonisation / mixing Foam reduction
Faggiolati Submersible Mixers
Thanks to their versatility, Faggiolati’s mixers can be used in a wide range of applications. The combination of various construction materials, the stainless steel propellers and double silicon carbide mechanical seals allow the use of these mixers in highly corrosive conditions and at high temperatures. Typical applications for these types of mixer are: – homogenisation […]
Faggiolati Submersible Electric Pumps
Construction Data Submersible electric pumps, robust in construction, watertight electric motors accommodated in compartment, connected, by shafts of reduced lengths, to the impellers situated at the pump casing by the interposition of oil chamber between the hydraulic side and the electric motor. Asynchronous, three-phase electric motors, squirrel cage type, IP 68 protection, class H insulation. […]
Faggiolati Aeration: Ossi-Mix
The System is based on the use of a special hydraulic system with a 3-channel centrifugal impeller, which works in a special 12-outlet diffuser. The outlet of the pump is thus spread among the 12 nozzles that deliver the sludge to be aerated into 12 individual mixing chambers. In these chambers the sludge is contacted […]